Product was successfully added to your shopping cart.
AXEON HF6 - Series High Rejection and Low Energy Reverse Osmosis Membrane Elements

AXEON HF6 - Series High Rejection and Low Energy Reverse Osmosis Membrane Elements are manufactured using the industry’s leading membrane film technology.

Request a Quote

AXEON HF6 - Series High Rejection and Low Energy Reverse Osmosis Membrane Elements are manufactured using the industry’s leading membrane film technology. These membranes offer reliability, high performance and deliver consistent results. They provide increased production, superior rejection rates and low energy consumption while operating at low applied pressures.

AXEON HF6 - Series High Rejection and Low Energy Reverse Osmosis Membrane Elements are one of the industry’s most superior performing reverse osmosis membrane elements.

AXEON HF6 - Series High Rejection and Low Energy Reverse Osmosis Membrane Elements are available in all standard 2.5 inch and 4.0 inch commercial sizes and feature a tape wound exterior. Advanced membrane technology and manufacturing processes ensure high quality and superior performance. All elements are shipped dry for an indefinite shelf life, easier handling and a lighter shipping weight.

AXEON HF6 - Series High Rejection and Low Energy Reverse Osmosis Membrane Elements are 100% vacuum integrity tested.

Benefits:
  • High Boron Reduction
  • Available in all Industry Standard Sizes
  • Low Energy with High Rejection Rates
  • Improved RO System Performance and Water Quality
  • Individually Inspected, Qualified and Vacuum Tested
  • Customization Available
Specifications
Part Number
Description
Applied Pressure (psi / bar)
Permeate Flow Rate (gpd / m3/d)
Nominal Salt Rejection (%)
210475
HF6 – 2514
150 / 10.34
225 / 0.85
99.40
210474
HF6 – 2521
150 / 10.34
400 / 1.51
99.40
210316
HF6 – 2540
150 / 10.34
850 / 3.22
99.40
210473
HF6 – 4014
150 / 10.34
600 / 2.27
99.40
210472
HF6 – 4021
150 / 10.34
1000 / 3.79
99.40
210317
HF6 – 4040
150 / 10.34
2500 / 9.46
99.40
Operating Limits
  • Membrane Type: Polyamide Thin – Film Composite
  • Maximum Operating Temperature (°F / °C): 113 / 45
  • Maximum Operating Pressure (psi / bar): 600 / 41
  • pH Range, Continuous Operation*: 2 – 11
  • pH Range, Short Term Cleaning (30 Min.): 1 – 13
  • Maximum Feed Silt Density Index (SDI): 5
  • Chlorine / Chloramine Tolerance (ppm): 0
  • Maximum Feed Flow Rate (gpm): 2.5” = 6 4.0” = 14