Product was successfully added to your shopping cart.
AXEON CRO – Series Reverse Osmosis System

AXEON CRO – Series Reverse Osmosis System utilizes reverse osmosis technology and features a four stage pre–filter, membrane and post–filter design that is housed inside a single cartridge.

Request a Quote

AXEON CRO – Series Reverse Osmosis System utilizes reverse osmosis technology and features a four stage pre–filter, membrane and post–filter design that is housed inside a single cartridge. A fifth stage post–polishing inline carbon filter is installed between the tank and faucet for even better tasting water.

The system includes a two–gallon white storage tank, faucet, tubing and quick connect fittings for a fast and easy installation.

Stage 1 20 Micron Sediment Pre–Filter
Stage 2 GAC Pre–Filter
Stage 3 50 GPD Thin Film Composite Reverse Osmosis Membrane
Stage 4 Post Carbon Filter Stage 5 In–Line GAC Post–Filter

With only one main cartridge and one inline carbon filter, the AXEON CRO – Series Reverse Osmosis System saves time and money on service calls and replacement cartridges.

No preliminary tank or unit assembly is required. The tank, feed and drain lines are pre–plumbed in the unit and tested at the factory. Final onsite installation is fast and simple.

The AXEON CRO – Series Reverse Osmosis System incorporates 3/8” tubing for faucet and tank connections. The larger diameter tubing ensures faster flow rate of approximately 30% from the faucet.

Benefits :
  • Superior Product to Waste Ratio
  • Can Reduce Water Waste by 50%, More Water to the Tank and Less Water to the Drain
  • High Flow Membrane Ensures Faster Tank Refilling
  • Small Footprint for Easy Installation
Specifications
Part Number
Model Number
Systems Capacity
(gpd / lpd)
Product to
Waste Ratio
Nominal TDS
Reduction %
Dimensions –
L x W x H (in / mm)
Shipping Weight
(lbs / kg)
209440
CRO – 50
50 / 189
1:2
96.5
9.72 x 15.38 x 13.75 / 246.9 x 390.7 x 349.2
11 / 5
Feedwater Requirements
Pressure (psi / bar) 40 – 80 / 2.76 – 5.52
Temperature (°F / °C) 40 – 100 / 4 – 38
TDS (ppm) <1000
Turbidity (NTU) <1 NTU
SDI <5
pH 4 – 8
Chlorine (ppm) <1.0
Feedwater must be potable, municipal water. Must be free of potential membrane foulants such as Iron, Hydrogen Sulfide and Manganese.
Performance Specifications
Model # CRO – 50 Membrane
Production (gpd / lpd) 50 / 189.3
Waste to Product 1.67:1
TDS Reduction % 96.5
Arsenic V Reduction % 97.8
Cysts Reduction % >99.99
Lead Reduction % 98.0
Tested at 60 psi (4 bar), 500ppm TDS municipal water, 77°F (25°C).
Replacement Cartridges
Part Number Stage Description Replacement Interval
206681 1 –4 4 – Stage Cartridge
1) 20 Micron Sediment Pre–Filter
2) Granular Activated Carbon Prefilter
3) Reverse Osmosis Membrane
4) Granular Activated Carbon Post–Filter
12 Months
206682 5 Granular Activated Carbon Post–Filter (In–Line between Tank and Faucet) 6 – 12 Months