Product was successfully added to your shopping cart.
AXEON NF3 – Series Low Monovalent Ion Rejection Nanofiltration Membrane Elements

AXEON NF3 – Series Low Monovalent Ion Rejection Nanofiltration Membrane Elements are manufactured using the industry’s leading membrane film technology.

Request a Quote

AXEON NF3 – Series Low Monovalent Ion Rejection Nanofiltration Membrane Elements are ideal for removing a high percentage of TOC and THM precursors with medium to high salt passage and medium hardness passage. AXEON NF3 – Series Membrane Elements are an ideal choice for surface water and ground water where good organic removal is desired with partial softening.

AXEON NF3 – Series Low Monovalent Ion Rejection Nanofiltration Membrane Elements are manufactured using the industry’s leading membrane film technology. These membranes offer reliability, high performance and deliver consistent results. Water treatment professionals have come to rely on the superior performance and dependability of AXEON NF3 – Series Membrane Elements.

Benefits:
  • All Industry Standard Sizes
  • Nanofiltration Membrane Elements
  • Improved RO System Performance
  • Superior Quality and Cost Savings
  • Individually Inspected, Qualified and Vacuum Tested
  • Private Labeling and Customization Available
Specifications
Part Number
Description
Applied Pressure (psi / bar)
Permeate Flow Rate (gpd / m3/d)
Nominal Salt Rejection (%)
200401
NF3 – 2514
70 / 4.83
200 / 0.76
40 – 50
200402
NF3 – 2521
70 / 4.83
350 / 1.33
40 – 50
200403
NF3 – 2540
70 / 4.83
850 / 3.22
40 – 50
200404
NF3 – 4014
70 / 4.83
400 / 1.51
40 – 50
200405
NF3 – 4021
70 / 4.83
1000 / 3.79
40 – 50
200406
NF3 – 4040
70 / 4.83
2200 / 9.46
40 – 50
Operating Limits
  • Membrane Type: Polyamide Thin – Film Composite
  • Maximum Operating Temperature (°F / °C): 113 / 45
  • Maximum Operating Pressure (psi / bar): 600 / 41
  • pH Range, Continuous Operation*: 2 – 11
  • pH Range, Short Term Cleaning (30 Min.): 1 – 12
  • Maximum Feed Silt Density Index (SDI): 5
  • Chlorine / Chloramine Tolerance (ppm): 0
  • Maximum Feed Flow Rate (gpm): 2.5” = 6 4.0” = 16